This is my first post on home automation. As a 'Hello World' project, switching on/off a bulb is a common use case. This post is not an exception. But to spice it up, we'll use MQTT (MQ Telemetry Transport) - a machine-to-machine (M2M)/Internet of Things (IOT) connectivity protocol and an android app (IoT MQTT Dashboard). Bulb is merely a symbolic representation of an electrical device. We can practically control any device (Internet of Things) over internet.
Articles tagged with 'esp8266-12e'
So far, we have flashed MicroPython firmware onto an ESP8266 and setup WebREPL to run programs over WIFI on the chip. Now it's time for a hands-on excercise. We'll remotely switch on/off and control brightness of an LED using MicroPython WebREPL.
WebREPL daemon auto-start is disabled by default in MycroPython on ESP8266 for security reason. Here, we'll enable the same, connect to the REPL over WIFI using locally installed WebREPL client and run a "Hello World" program remotely on the chip.
By default, ESP8226 module comes with AT Firmware. In this post, we'll see how to flash MicroPython firmware onto an ESP8266 ESP-12E chip using esptool.